- New product
Fast Car Mount
Mounting cameras to cars should not have to be complex or expensive.
We have come up with a solution that is simple and easy to use that helps you get that car shot without the hassle.
Simply pull the car mount out from the case and place it on your car. It is that quick!
No shipping available? Contact us on live chat or email.
The Fast Car Mount is a lightweight and simple car mount solution that allows you to get set up fast.
Pull the Fast Car Mount out of the included custom foam hard case, mount your hardware, and then place it on the vehicle.
Designed for lightweight cinema cameras, the Fast Car Mount has been created for Students, Indie, and Professionals, but without the pro pricing.
The mounting plate, measuring in at just 21cm or 8.27in (length and width), includes a wide range of mounting holes for Tripod heads and gimbal plates.
On each side, there are large slots for strapping as well as spare 3/6-16 and 1/4-20 threads for accessories.
The main mounting method for easy and fast deployment is with magnets. Our magnets have a holding force of 20KG each. Use either 3, 4 or 6 depending on your needs.
Upgrade to suction cups for an increased holding force of 35KG and to be able to use the Fast Car Mount on any flat surface such as carbon or glass.
Available with optional anti-vibration hardware, the Fast Car Mount can be upgraded to allow the mounting of gimbals.
We include support for the following, though many other gimbals will be supported with a single 3/8-16 screw;
- 3/8-16 Tripod heads
- DJI Ronin Universal Plate
- DJI Ronin-S Universal Mount
- DJI Ronin Small Rig "Quick Release Tripod Adapter"
- Tilta Gravity G Series Gimbal Body Mounting Plate
- More to come
Included in the base package;
- A single mount plate
- Six 66mm Rubber Magnets
- Custom Foam Plastic Case (option to not ship with this case in return for free shipping)
Included in the Anti Vibration package;
- Two mount plates
- Eight steel cable vibration dampeners
- Eight cable mount blocks
- Six 66mm Rubber Magnets
- Custom Foam Plastic Case
Suction cups upgrade is available for both packages. The case includes storage space for all 4 suction cups.
All packages include bolts and tools.
The mounting plate is made from 8mm thick Aluminium and will be anodized black along with the cable mount blocks.
We advise always using safety straps to hold the Fast Car Mount to the vehicle.
We do not include any as part of the package. You will need to buy some from a local retailer.
Always exercise caution when mounting anything to a vehicle you or someone else intends on driving on public or private roads.
Always use straps and safety equipment. Never block the driver's view. Never drive on public roads without a permit, safety car in front, and behind talent car.
The driver should be 100% focused on driving and not acting.
OGara Studios takes no responsibility in the event of damage or death caused by the use of our products.